CLICK ON THUMBNAIL
FOR LARGER IMAGE
TYPE
MODEL
DESCRIPTION        
RETAIL PRICE
Baikal
A Weaver type rail that clamps onto the barrel of a Baikal air pistol. Approx. weight 4 oz.        
$83.00
Benelli
A Weaver type rail that attaches to the rear dovetail of the Benelli Model 95 and is secured by set screws. A cap screw at the rear of the rail captures the rear sight leaf and prevents any forward motion of the rail due to recoil. Approx. weight 2 oz.
$83.00
Browning
A Weaver type rail for the Browning Medallist that clamps onto the ventilated rib. It has fingers that fit into the rib ventilations to secure the rail. Approx. weight 4 oz.        
$83.00
Colt
A Weaver type rail that extends from the rear of the slide to just forward of the slide ejection port. A steel insert that replaces the rear sight has a recoil bar that mates to the rail. Two flat head screws hold rail in place. The rail also has a  "Giles" type ejection port. This mount is for target loads only. Must be custom fitted to slide by BME. Approx. weight 3 oz.        
$99.00
Daisy
A Weaver type rail that clamps onto the barrel of the Daisy models 717,737, and 777. It has an extension rail that extends back almost to the loading port. Approx. weight 4.5 oz.
$83.00
FAS
A Weaver type rail for the FAS Model 604 air pistol. It attaches by the front sight dovetail and set screws at the rear. Approx. weight 3 oz.
$83.00
Feinwerkbau
A Weaver type rail that can allow optics to be left permanently on and be removed for slide removal with minimum zero impact. Has a vee block to capture the rear sign pivot pin and a dovetail feature to replace the front sight. A set screw at the vee block adjusts the fit in the rear sight channel. A single screw locks the rail on to the pistol. Approx. weight 3 oz.
$108.00
Feinwerkbau
A Weaver type rail that clamps onto the barrel of the FWB Model 65 air Pistol. Approx. weight 7 oz.
$83.00
Giles
A Weaver type rail that replaces the original Giles rib on the Model 1911 .38 and .45 calibers. Approx. weight 3 oz.
$73.00
Giles
A  Weaver type rail for the Giles High Standard. Approx. weight 3 oz.
$73.00
Hammerli
A full length Weaver type rail for the Hammerli model 208S that attaches at the front and rear sight locations. Dovetails at the front and rear allow for removal for cleaning with little or no change in point of impact. Has ejection cut out for aid of ejection. Approx. weight 3 oz.
$105.00
Hammerli
A full length Weaver type rail for the Hammerli model 210 that attaches at the front and rear sight locations. Similar to the HAM208R mount. Approx. weight 3.7 oz.        
$105.00
Hammerli
HAM-208-DR        
A Doctor base for the Model 208. It replaces the rear sight assembly. Approx. weight 3 oz.        

$95.00
Hammerli
A modified Weaver type rail to attach the UltraDot LT sign on the Model 208. It replaces the rear sight assembly. Approx. weight 2 oz.
$99.00
High Standard
A set of rings (2 per set) that simultaneously clamps a High Standard .90 inch diameter bull barrel and a 1 inch diameter optical sight. Approx. weight 2 oz.        
$57.00
High Standard
HS-T30
A set of rings (2 per set) that simultaneously clamps a High Standard .90 inch diameter bull barrel and a 30 mm optical sight. Approx. weight 2 oz.
$57.00
High Standard
A Weaver type rail for the High Standard Fluted barrel. It attaches by a dovetail that replaces the front sight and a clamp that clamps the barrel just forward of the "take down button". Approx. weight 4 oz.
$103.00
High Standard
A Weaver type rail for the High Standard  5.5" bull barrel. It attaches by a dovetail that replaces the front sight and a clamp that clamps the barrel just forward of the "take down button". Approx. weight 3 oz.
$103.00
High Standard
A Weaver type rail that is fastened to the tapered barrel of the old "Buck Rogers" High Standard. A tapered bore clamp and a set screw on the under side secure it in place. Available for 6.75" and 8" barrels. Approx. weight 4 oz.        
$106.00
High Standard
A Weaver type rail that is attached to the Texas manufactured High Standard pistols with factory drilled and tapped barrels. Proper screws are supplied. Approx. weight 2 oz.
$59.00
High Standard
A Weaver type rail with a clamping block that clamps onto the .90 inch bull barrel of various High Standard models. Approx. weight 5 oz.
$103.00
High Standard
A Weaver type rail direct replacement for the High Standard 5.5 inch Victor model rib. Has relief in the ejection area for positive ejection. Proper screws supplied. Approx. weight 3.5 oz.
$61.00
High Standard
A Weaver type rail direct replacement for the High Standard 4.5 inch Victor model rib. Has relief in the ejection area for positive ejection. Proper screws supplied. Approx. weight 3 oz.
$61.00
Mitchell
A Weaver type rail direct replacement for the Mitchell Victor model. Has relief in ejection area for positive ejection. Approx. weight 3.5 oz.        
$61.00
Mitchell
A Weaver type rail for the Mitchell bull barrel model that is drilled and tapped for a mount. It is similar in form as the HS-TXR. Approx. weight 2 oz.
$59.00
Morini
A Weaver type rail that has a clamping block that clamps onto the barrel of a Morini air pistol.  Can be used on other air pistols with the same diameter barrel, e.g., Hammerli and Walther. Approx. weight 4 oz.
$83.00
Pardini
A Weaver type rail that has a clamping block that clamps onto the barrel of a Pardini Model K58 air pistol. Approx. weight 4 oz.
$83.00
Pardini
A Weaver type rail incorporated in an aluminum barrel shroud. Reduced weight is an advantage. The original barrel and shroud must be sent to BME for fitting. Approx. weight 6 oz.
$160.00
Ruger
A Weaver type rail with a clamping block that clamps the bull barrels of the Ruger Mark I, II models and the .22/.45 model . Approx weight 5 oz.
$103.00
Sako
A Weaver type rail that fits over the rib on the Sako Triace pistols. It is secured by the front sight dovetail and the rear sight screw. Good for all calibers. Approx. weight 5 oz.
$95.00
SIG
A Weaver type rail for the SIG 240 cal 32/38. It uses the rear sight pivot pin and the front sight dovetail to attach. Set screws on the back of the rail and the top of the rail take the force of recoil. Approx. weight 3 oz.
$85.00
S&W
A Weaver type rail for the S&W52 that is frame mounted in the same manner as barrel weights. The rail extends back to just forward of the rear sight. Mount must be removed to remove slide. Resighting may be required. Resighting can be reduced or eliminated if an accurate dimension of the distance between the bottoms of the grooves on the dust cover can be provided. The mount can then be machined for a closer fit. Approx. weight 2 oz.
$105.00
S&W
A Weaver rail direct replacement for the old S&W52 Bomar rib. Requires drilling and tapping of slide plus removal of front sight. Proper screws supplied. Approx. weight 2 oz.
$62.00
S&W
A Doctor mount for the Model 52. It replaces the rear sight. Approx. weight 1 oz.
$56.00
S&W
A Weaver type rail for the S&W MP that accommodates the Aimpoint Micro series sight. It replaces the rear sight. Weight is approx. 1 oz.
$75.00
S&W
A Weaver type rail that replaces the rear sight of the S&W52. It is secured with set screws. A nylon tipped set screw eliminates vibration. Can also be used on the older S&W41 with dovetail barrels. Approx. weight 2 oz.
$81.00
S&W
A modified Weaver type rail to mount an UltraDot LT on the S&W model 52. Approx. weight 1 oz.
$81.00
S&W
A dovetail base for the Tasco Optima 2000 optics that fits the S&W52. Approx. weight 1 oz.
$56.00
S&W
A Weaver type rail that replaces the rear sight of the S&W945. A steel insert that replaces the rear sight has a recoil bar that mates with the rail. It is held in place with a flat head screw. The rail also has a "Giles" type ejection port. This mount is for target loads only. Approx. weight 3 oz.
$99.00
S&W
A Weaver type rail for the S&W MP to accommodate the Aimpoint Micro series sights. It replaces the rear sight.  Approx. weight 1 oz.
$75.00
S&W
Doctor mount for the models 945 & 952. It replaces the rear sight. Approx. weight 1 oz.
$56.00
S&W
Doctor mount for the Model 952-2. It has a dovetail to replace the rear sight. Approx. weight 1 oz.
$56.00
S&W
A Weaver type rail for the S&W 952-2. It has a dovetail to replace the rear sight.  Approx. weight 1 oz.
$75.00
S&W
A Weaver type rail for the Model 952-2 that is similar to the S&W52RR except it has the proper dovetail for the 952-2. Approx. weight 2 oz.
$81.00
S&W
A Weaver type rail for the S&W952-1 that is similar to the S&W52-RR except it has the Wilson Recoil Bar and screw for attachment. Approx. weight 2.5 oz.
$80.00
S&W
S&W952-1
UltraDot LT
A modified Weaver type rail for the Model 952-1 to accommodate the UltraDot LT sight. It replaces the rear sight. Approx. weight 1 oz.
$81.00
S&W
A modified Weaver type rail for the Model 952-2 to accommodate the UltraDot LT sight. It replaces the rear sight. Approx. weight 1 oz.
$81.00
S&W
A Weaver type rail similar to the S&W945R. For target loads only. Approx. weight 3 oz.
$99.00
S&W
A Wilson Recoil Bar base for the Tasco Optima 2000 optics that fits the S&W952-1. Approx. weight 1 oz.
$56.00
S&W
A modified Weaver type rail for the S&WMP to accommodate the UltraDot LT sight. It replaces the rear sight. Approx weight 1 oz.
$81.00
S&W
A Weaver type rail for the S&W MP to accommodate the Aimpoint Micro series sights. It replaces the rear sight.  Approx. weight 1 oz.
$75.00
S&W
A  Weaver type rail for the 9mm S&W MP that is similar to the S&W 52RR except it has a ejection port. It replaces the rear sight. Approx. weight 2.5 oz.
$81.00
S&W
A base for the S&W MP to accommodate the Tasco 2000 Optima, JP Enterprise or Burris sights. Approx. weight 1 oz.
$56.00
S&W
A Doctor mount for the S&WMP. It replaces the rear sight. Approx. weight 1 oz.
$56.00
Unique
A Weaver type rail for the Unique model 69 that has a clamping block that clamps the barrel. Approx. weight 4 oz.
$103.00
Unique
A Weaver type rail for the Unique model 96. The rail swings the optics out of the way to allow insertion and removal of the magazine. It attaches at the front sight dovetail and rear sight cross pin. Approx. weight 6 oz.
$147.00
Walther
A Weaver type rail for the Walther GSP & OSP Models. Has one Weaver ring location. It attaches by the 2 windage cross pins and set screws. Approx. weight 2 oz.
$65.00
Walther
A Weaver type rail for the Walther GSP & OSP models. Has three Weaver ring positions to accommodate most optics. It attaches in the same manner as the WA-A. Sturdy enough for the 32 cal. Approx. weight 2 oz.
$103.00
Walther
A Weaver type rail for the Model 2000 that is located and held onto the rear sight mounting base in the same manner as the rear sight. It allows the use of iron or optical sight by the removal of 2 screws. Approx. weight 2 oz.
$103.00
Walther
A Doctor mount for the Models OSP, GSP and Expert. It attaches in the same manner as the WA-A. Approx. weight 2 oz.
$93.00
Walther
A modified Weaver type rail for models OSP, GSP and Expert to accommodate the UltraDot LT sight. It attaches in the same manner as the WA-A. Approx. weight 2 oz.
$93.00
Walther
A Weaver type rail for the Walther Expert Model. It has the 3 Weaver ring locations forward of those on the WA-PR3C model. It attaches in the same manner as the WA-A. Approx. weight 2 oz.
$103.00
Walther
A Weaver type rail for the Walther GSP & OSP models. Similar to the WA-PR3C except longer to accommodate the Aimpoint 1000 sight. Approx. weight 3 oz.
$103.00
Walther
A Weaver type rail for the Walther Model SSP  that extends back to just forward of the ejection port. It is attached to the frame by the dovetail on the underside of the frame. Approx. weight 4 oz.
$104.00
Walther
A mount for the Tasco Optima 2000 sight that attaches to the Walther Model SSP. It attaches to the frame in the same manner as the rear sight. Approx. weight 2 oz.
$56.00
Walther
An UltraDot LT mount for the Walther Model WA-SSP. It attaches to the frame in the same manner as the rear sight. Weight is approx 2 oz.
$81.00
Walther
A Doctor mount for the Walther Model SSP that attaches to the frame in  the same manner as the rear sight. Approx. weight 2 oz.
$56.00
PRODUCT LIST

Call 603-356-6580 for ordering information

 
HOME
ABOUT BME
PRODUCT LIST
Custom Sports Products, LLC
CUSTOM WORK DONE AT NON-CUSTOM PRICES
CONTACT
GALLERY